Outlets, Switches & GFCI Protection
Dead receptacles, missing GFCI protection, and kitchen and bathroom circuits that were never sized for modern use.
Service area
Electrician in Mid-City, Los Angeles
North of us along the Washington, Venice and Pico corridors. Mid-City has a high share of small multifamily buildings, which changes the kind of electrical work we do there.
Duplexes, fourplexes and shared services
Much of Mid-City was built out in the 1920s and 1930s as single-family houses and small income properties, and a large number of those houses were later divided. The electrical result is buildings with multiple meters on one aging service, house panels feeding common-area loads that nobody has looked at in thirty years, and branch circuits that cross between units because the original layout did not anticipate the division.
For owners and managers, that means the work is often about untangling and documenting as much as repairing: identifying which meter feeds what, getting panel schedules accurate, and separating circuits that should never have been shared between tenants.
Common calls from Mid-City tenants and owners
Kitchen circuits tripping under normal use, because one original circuit is serving a full modern kitchen. Bathroom receptacles with no ground-fault protection. Wall heaters and window air conditioners on circuits sized for neither. Dead outlets traced to a failed back-stab connection in a box behind a tenant’s furniture. These are ordinary, fixable problems, and they are frequently items flagged during habitability inspections.
Permits and utility
Mid-City is within the City of Los Angeles: permits and inspections through Department of Building and Safety, electric service from LADWP. For multifamily service upgrades, the utility coordination and the meter arrangement are usually the long pole in the schedule.
Getting there
Mid-City is a straight shot north from our shop on West Jefferson, which makes both emergency response and quick diagnostic visits practical.
Working in Mid-City
- Large share of 1920s–1930s duplexes and fourplexes
- Many converted single-family houses with shared services
- Frequent habitability and inspection correction work
- City of Los Angeles permits and inspection
- LADWP electric service
- Direct route north from our Jefferson Boulevard shop
Electrical services available in Mid-City
Work here leans toward small multifamily repairs, device and circuit corrections, and panel work.
Electrical Panel Upgrades
House panel and multi-meter service work on divided and small multifamily buildings.
24/7 Emergency Electrical Repairs
24-hour response for tenants and owners, including loss of power to individual units.
Home Rewiring & Knob-and-Tube Replacement
Circuit-by-circuit rewiring for older duplexes, including separating circuits shared between units.
Mid-City questions
I rent in Mid-City. Can I call you directly?
You can call and describe the problem, and we are glad to explain what is happening. Authorization for work on the building has to come from the owner or property manager, so we will usually ask you to loop them in.
Can you separate circuits shared between two units?
Yes, and it is common work here. It usually means running new circuits from the correct panel for each unit, which is permitted work in the City of Los Angeles.
My kitchen breaker trips every time I use two appliances. Is that a breaker problem?
Almost never. It means one circuit is carrying what current code expects to be spread over several. The fix is additional dedicated circuits, not a bigger breaker.
Do you handle corrections flagged by an inspector?
Yes. We work from the notice, correct the cited items under permit where required, and attend the reinspection.
Nearby service areas
Mid-City borders West Adams to the south, and we also cover Baldwin Hills, Crenshaw, Culver City, Palms and Mar Vista.
Electrical problem in Mid-City?
Call (213) 584-4180. We cover Mid-City around the clock, for owners, managers and occupied units.